Deimos ®
Solid surface made up of natural mineral material combined with acrylic and polyester resin.
Its special feature is that, being homogeneous throughout its entire thickness, it allows the product to be fully recoverable from scratches or cuts.
It gives a warm and pleasant tactile sensation similar to natural surfaces
The cold curing process enables the creation of flowing shapes which are completely free of joints.
The exclusive Omnitech production technologies ensure total design freedom.
The surface can be cleaned with a soft cloth and water, and is suitable for contact with food.
Can be cut, drilled, milled, planed or inlaid with normal diamond tools.
Does not release vapours, non-toxic if burned, and can be disposed of with household waste.
È disponibile inoltre nella versione Deimos Stone®, un’evoluzione del prodotto originario contraddistinto da una puntinatura grafica più irregolare che evoca la sensazione della pietra naturale e lascia filtrare la luce con un leggero effetto traslucido. Deimos Stone® assicura un’altissima resistenza al graffio e si presta quindi, con grande efficacia, per l’applicazione ad esempio su piani di lavoro.
Finishes and textures
Finish: {{ valoreFinitura(nome_finitura) }}
Color: {{ fin.colore }}
HEX: {{ fin.hex }}
Technical features
Property |
Tests |
Typical Results |
Unit of measure |
Density |
DIN ISO 1183 |
1.83±0.02 |
g/cm3 |
Impact resistance (sphere) |
EN ISO 19712-2:2013 |
125±5 |
cm |
Hardness (Barcol) |
UNI EN 4278 |
62±1.5 |
HBa |
Resistance to bacteria and fungi |
Inhibits the growth of bacteria and fungi |
No. of colonies |
|
Degree of Whiteness |
>94 |
L (CIE-L,a,b) |
|
Stability to light (Xenon) |
ASTM D2565:2008 |
4/5 |
Scale 1÷5 |
Resistance to thermal shock |
EN 14688:2018 |
1000 |
cycles |
EN 14527:2019 |
100 |
cycles |
|
EN 14516:2019 |
100 |
cycles |
|
Stain resistance |
EN 14688:2018 EN 14527:2019 EN 14516:2019 |
No defects |
--- |
Resistance to dry heat |
EN 13310:2015 |
No defects |
--- |
Scratch resistance |
EN 14688:2018 EN 13310:2015 |
52±1 |
μm |
Abrasion resistance |
EN 14688:2018 EN 13310:2015 |
551± 10 |
mg |
Conformity of CE marking |
Obtained |
||
CSA certification (USA and Canada) |
Obtained |
Property |
Tests |
Typical Results |
Unit of measure |
Density |
DIN ISO 1183 |
1.74±0.02 |
g/cm3 |
Impact resistance (sphere) |
EN ISO 19712-2:2013 |
140±10 |
cm |
Hardness (Barcol) |
UNI EN 4278 |
66±1 |
HBa |
Stability to light (Xenon) |
UNI-EN ISO 4892-2:2013 |
4/5 |
Scale 1÷5 |
Resistance to thermal shock |
EN 14688:2015 |
1000 |
cycles |
EN 14527:2016 |
100 |
cycles |
|
EN 14516:2015 |
100 |
cycles |
|
Stain resistance |
EN 14688:2015 EN 14527:2016 EN 14516:2015 |
No defects |
--- |
Resistance to dry heat |
EN 13310:2015 |
No defects |
--- |
Scratch resistance |
EN 14688:2015 EN 13310:2015 |
43 ± 2 |
μm |
Abrasion resistance |
EN 14688:2015 EN 13310:2015 |
183± 2 |
mg |
Conformity of CE marking |
Obtained |
||
CSA certification (USA and Canada) |
--- |
Use and maintenance
…visualizza per informazioni…