A&T Mod. Vasca Class con Pannelli Capitonè
A&T Mod. Vasca Class con Pannelli Capitonè
Arcom - Piatto Doccia - Texture Roccia
GB Group - Mod. Lame
Arbi - Mod. Olly
Arbi - Mod.Newypsilon
Arbi - Mod.Blip semincasso
Arbi - Mod.Blip
Geacril ®
Coated surface
with ceramic effect
Coated surface material that is particularly glossy, with a surface appearance similar to ceramic. The gloss effect is toned down in the Geacrilmatt® version , which has a velvety finish. Can be produced in a wide range of colours without risk of wear, because the colour is not simply painted on but is a gelcoat, applied directly to the mould, which binds chemically to the material thus making it highly resistant to stains.
The surface coating film gives Geacril® products a surface luster that makes them elegant, pleasant to the touch and very similar to ceramic material.
The exclusive Omnitech production technologies ensure total design freedom.
Surface can be cleaned with a soft cloth and water.
Can be cut, drilled, milled, planed or inlaid with normal diamond tools.
The flowing forms and absence of joints create a unique visual sensation, with sufaces which are continuous and symmetrical, in both matt and gloss finishes.
Geacril® can be produced in a wide range of colours.
Finishes and textures
Finish: {{ valoreFinitura(nome_finitura) }}
Color: {{ fin.colore }}
HEX: {{ fin.hex }}
Technical features
|
Properties |
Tests |
Typical Results |
Unit of measure |
|
Density |
DIN ISO 1183 |
2.01±0.01 |
g/cm3 |
|
Impact resistance (sphere) |
EN ISO 19712-2:2013 |
100±10 |
cm |
|
Hardness (Barcol) |
UNI EN 4278 |
37±3 |
HBa |
|
Resistance to bacteria and fungi |
Inhibits the growth of bacteria and fungi |
No. of colonies |
|
|
Degree of Whiteness |
>95 |
L (CIE-L,a,b) |
|
|
Stability to light (Xenon) |
UNI-EN ISO 4892-2:2013 |
4/5 |
Scale 1÷5 |
|
Resistance to thermal shock |
EN 14688:2018 |
1000 |
cycles |
|
EN 14527:2019 |
100 |
cycles |
|
|
EN 14516:2019 |
100 |
cycles |
|
|
Stain resistance |
EN 14688:2018 EN 14527:2019 EN 14516:2019 |
No defects |
--- |
|
Scratch resistance |
EN 14688:2018 EN 13310:2015 |
55±5 |
μm |
|
Abrasion resistance |
EN 14688:2018 EN 13310:2015 |
545± 10 |
mg |
|
Conformity of CE marking |
Obtained |
||
|
CSA certification (USA and Canada) |
Achieved (only for white colour) |
||
|
Properties |
Tests |
Typical Results |
Unit of measure |
|
Density |
DIN ISO 1183 |
2.01±0.01 |
g/cm3 |
|
Impact resistance (sphere) |
EN ISO 19712-2:2013 |
100±10 |
cm |
|
Hardness (Barcol) |
UNI EN 4278 |
37±3 |
HBa |
|
Resistance to bacteria and fungi |
Inhibits the growth of bacteria and fungi |
No. of colonies |
|
|
Degree of Whiteness |
>95 |
L (CIE-L,a,b) |
|
|
Stability to light (Xenon) |
UNI-EN ISO 4892-2:2013 |
4/5 |
Scale 1÷5 |
|
ReResistance to thermal shock |
EN 14688:2018 |
1000 |
cycles |
|
EN 14527:2019 |
100 |
cycles |
|
|
EN 14516:2019 |
100 |
cycles |
|
|
Stain resistance |
EN 14688:2018 EN 14527:2019 EN 14516:2019 |
Light halo (methylene blue) |
--- |
|
No defects |
EN 14688:2018 EN 13310:2015 |
55±5 |
μm |
|
Abrasion resistance |
EN 14688:2018 EN 13310:2015 |
545± 10 |
mg |
|
Conformity of CE marking |
Obtained |
||
|
CSA certification (USA and Canada) |
--- |
||
Use and maintenance
…visualizza per informazioni…
