Catino Fashion in DeimosStone - Sabbia
Vasca integrata in DeimosStone - Sabbia
Catino Fashion in DeimosStone - Bianco Traffico
Deimos® Stone
The value of colour
Solid Surface made from a blend of several natural minerals, with different colours and sizes, and polyester resin. Its distinctive characteristic is that, even in the coloured versions, the colour remains homogeneous throughout the entire thickness, thus allowing scratches or cuts to be repaired completely.
It gives a warm and pleasant tactile sensation similar to natural surfaces
The cold curing process enables the creation of flowing shapes which are completely free of joints.
The exclusive Omnitech production technologies ensure total design freedom.
The surface can be cleaned with a soft cloth and water, and is suitable for contact with food.
Deimos® can be produced in a wide range of colours.
Can be cut, drilled, milled, planed or inlaid with normal diamond tools.
Does not release vapours, non-toxic if burned, and can be disposed of with household waste.
Finishes and textures
Finitura: {{ valoreFinitura(nome_finitura) }}
Colore: {{ fin.colore }}
HEX: {{ fin.hex }}
Technical features
|
Property |
Tests |
Typical Results |
Units of measure |
|
Density |
DIN ISO 1183 |
1.74±0.02 |
g/cm3 |
|
Impact resistance (sphere) |
EN ISO 19712-2:2013 |
140±10 |
cm |
|
Hardness (Barcol) |
UNI EN 4278 |
66±1 |
HBa |
|
Stability to light (Xenon) |
UNI-EN ISO 4892-2:2013 |
4/5 |
Scala 1÷5 |
|
Resistance to thermal shock |
EN 14688:2018 |
1000 |
cicli |
|
EN 14527:2019 |
100 |
cicli |
|
|
EN 14516:2019 |
100 |
cicli |
|
|
Stain resistance |
EN 14688:2018 EN 14527:2019 EN 14516:2019 |
No defects |
--- |
|
Resistance to dry heat |
EN 13310:2015 |
No defects |
--- |
|
Scratch resistance |
EN 14688:2018 EN 13310:2015 |
43 ± 2 |
μm |
|
Abrasion resistance |
EN 14688:2018 EN 13310:2015 |
183± 2 |
mg |
|
Conformity of CE marking |
Obtained |
||
|
CSA certification (USA and Canada) |
--- |
||
Use and maintenance
…visualizza per informazioni…
